Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

DODGE STEALTH 91 - 96
EAGLE TALON 90 - 98
MITSUBISHI 3000GT 91 - 99
MITSUBISHI ECLIPSE 90 - 99

Wiring Diagrams and Drawings:

1997 Mitsubishi Eclipse- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - BLU
GROUND - BLK
FAST - BLU/BLK
SLOW - BLU/ORN

Special Rain Tracker Installation Notes for this vehicle:

NOTE: On the 90 - 94 Eclipse, SLOW - BLU/RED

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

All wires are available coming from the wiper
switch. They can usually be accessed by removing one or
two access panels (Kick Panels) and shrouds surrounding
the steering column. It is almost never necessary
to remove the steering wheel.

Models with and without factory intermittent have the same
wire color scheme.

Some models and years may vary slightly in wire colors.
If possible, confirm wire colors with service guide, and/or with
with a multimeter.

Mirage-- similar except FAST = BLU, SLOW = BLU/YEL

Print this page with your browser's print function.
Vehicle data file name: mitsubishi_eclipse.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800