Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
JEEP CHEROKEE 92 - 96
Wiring Diagrams and Drawings:
1996 Jeep Cherokee- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - DT-GRN/BLK
GROUND - BLK
FAST - RED/BLK
SLOW - BRN/TAN
Special Rain Tracker Installation Notes for this vehicle:
Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.
All connection are available at the Intermittent Wiper Control Module to the wires that lead
to the Wiper Motor. Models without Intermittent Wipers wires can be accessed at the Wiper Switch.
They can usually be accessed by removing one or two access panels (Kick Panels.)
If black ground is not available (some with non-intermittent)
find a suitable screw or bolt on the metal chassis of the
vehicle for the Rain Tracker ground.
If possible, check the wire function by checking voltages with a multimeter.
Print this page with your browser's print function.
Vehicle data file name: jeep_cherokee_92-96.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.