Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
JEEP CHEROKEE 84 - 91
JEEP COMANCHE 86 - 92
JEEP WAGONEER 84 - 90
JEEP WAGONEER 85 - 91
JEEP WRANGLER 86 - 95
Wiring Diagrams and Drawings:
1990 Jeep Cherokee- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - WHT
GROUND - CHASSIS
FAST - PPL
SLOW - GRY
Special Rain Tracker Installation Notes for this vehicle:
NOTE: Depending on were you splice into the wires, i.e. before or after the
switch connector, +12V may be LT-GRN/BLK, FAST may be DK-BLU/WHT and SLOW
may be WHT/BLK.
Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.
All wires except ground are available coming from the wiper
switch. They can usually be accessed by removing one or
two access panels (Kick Panels.)
For the Rain Tracker chassis ground, find a suitable chassis
ground. Be sure to scrape away paint as needed to get good
contact.
If possible, check the wire function by checking voltages with a multimeter.
Print this page with your browser's print function.
Vehicle data file name: jeep_cherokee_85-91.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.