Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
HYUNDAI ELANTRA 96 - 00
Wiring Diagrams and Drawings:
2000 Hyundai Elantra- also for vehicles with similar wiper systems
RT-50 - GSS (Ground Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - LOCATE
GROUND - BLK
FAST - GRN/BLK
SLOW - RED/YEL
Special Rain Tracker Installation Notes for this vehicle:
Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.
All wires except +12V are available coming from the wiper switch. They can
usually be accessed by removing one or two access panels (Kick Panels.)
For Rain Tracker power (+12V), locate a source of power hot in accessory or
run.(min.16 ga/ 10A circuit) The Cigarette lighter is often a good +12V source.
Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.
Print this page with your browser's print function.
Vehicle data file name: hyundai_elantra_96-00.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.