Vehicle-Specific Installation Notes

Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

HONDA-TRUCK ODYSSEY 05 - 08
HONDA-TRUCK RIDGELINE 06

Wiring Diagrams and Drawings:

2005 Honda Odyssey- also for vehicles with similar wiper systems
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - GRN
GROUND - BLK
FAST - BLU
SLOW - YEL
CAM - WHT

External Components Required for this installation

DIODE - 1N4004 OR SIMILAR RECTIFIER -
ATUOMOTIVE RELAY - -

Special Rain Tracker Installation Notes for this vehicle:

This vehicle has a digital wiper switch, so you have to connect the Rain Tracker
directly to the wiper motor wires. This means wires need to run through the firewall.
Also, an external relay (not supplied) is required. This makes this a more difficult
installtion than most.

Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.

Print this page with your browser's print function.
Vehicle data file name: honda_odyssey_05.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.