Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
HONDA-TRUCK CR-V 07
Wiring Diagrams and Drawings:
2007 Honda CR-V- also for vehicles with similar wiper systems
RT-50 - GSS (Ground Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - LOCATE
GROUND - BLK
FAST - WHT
SLOW - GRN
Special Rain Tracker Installation Notes for this vehicle:
Write the wire colors of the vehicle on the GSS drawing and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.
All wires except +12V are available coming from the wiper switch. They
can usually be accessed by removing one or two access panels(Kick Panels).
For Rain Tracker power (+12V), locate a source of power hot in accessory
or run(min.16 ga/ 10A circuit). This can be one of the +12V sources as
shown on the diagram, or some other accessory source. The cigarette
lighter is often a good +12V source.
Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.
Print this page with your browser's print function.
Vehicle data file name: honda_crv_07.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.