Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

BUICK-TRUCK RAINIER 04 - 07
CADILLAC-TRUCK ESCALADE 03 - 04
CHEVY-TRUCK AVALANCHE 03 - 04
CHEVY-TRUCK SILVERADO 03 - 04
CHEVY-TRUCK SSR 03 - 06
CHEVY-TRUCK SUBURBAN 03 - 04
CHEVY-TRUCK TAHOE 03 - 04
CHEVY-TRUCK TRAIL-BLAZER 02 - 07
GMC-TRUCK ENVOY 02 - 07
GMC-TRUCK SIERRA 03 - 06
GMC-TRUCK YUKON 03 - 04
HUMMER-TRUCK H2 03 - 07
OLDSMOBILE-TRUCK BRAVADA 02 - 04

Wiring Diagrams and Drawings:

RT-50 with General Motors type LZ, Color Scheme 3 wipers
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

GROUND - TAN
FAST - DK-BLU/WHT
MUX1 - GRY
MUX2 - PNK

External Components Required for this installation

RESISTOR - 390 - Color code: ORN-WHT-BRN

Special Rain Tracker Installation Notes for this vehicle:

Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.

In some, the DK BLU FAST control wire is DK-BLU/WHT directly off the switch,
and changes to DK-BLU at the connector coming from the switch wires.

+12V in accessory or run is not available at the wiper switch-- find
suitable source. (Good choice can be cigarette lighter.) Use 16ga. or larger
10-25amp circuit.

Check the Ground-- this can alternatively be BLK, BLK/WHT, or TAN. If you are
not sure you have a good ground, use a chassis ground.

Print this page with your browser's print function.
Vehicle data file name: gm_lz_c3.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800