Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

FORD-TRUCK EXPLORER 91 - 94
MAZDA-TRUCK NAVAJO 91 - 94

Wiring Diagrams and Drawings:

1992 Ford Explorer- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - RED
GROUND - BLK OR ORN
FAST - DK BLU/ORN
SLOW - WHT

Special Rain Tracker Installation Notes for this vehicle:

All wires can be located coming from the interval wiper module except the fast
wire. It can be taken directly from the wiper switch. They can usually be accessed
by removing one or two access panels (Kick Panels).

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.

Print this page with your browser's print function.
Vehicle data file name: ford_truck_exlporer_92.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800