Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
DODGE VIPER 92 - 02
Wiring Diagrams and Drawings:
2001 Dodge Viper- also for vehicles with similar wiper systems
Using the RT-50 to ground fast OR slow
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - DK-BLU
GROUND - BLK/LT-GRN
GROUND FOR FAST - RED/YEL
GROUND FOR SLOW - BRN/WHT
External Components Required for this installation
RELAY- SPDT / 12 COIL. MOST ANY WILL WORK. AVAIL FROM OEDES AS RLY-1 - -
Special Rain Tracker Installation Notes for this vehicle:
Some models and years may vary slightly in wire colors.
If possible, confirm wire colors with service guide, and/or with
with a multimeter.
Wire the RT-50 using both of the wiring diagrams shown below. Connect the S and F
points on the Ground fast OR slow drawing to the S and F points on the vehicle
wiring diagram.
The system works by grounding either the fast or slow outputs of the switch, fooling
the wiper control module into thinking that the user has selected those speeds.
- Note that you can use Blk/Lt-Grn wire from the switch instead of a chassis ground.
- Secure the relay with a cable tie.
Print this page with your browser's print function.
Vehicle data file name: dodge_viper_94-02.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.