Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

DAEWOO NUBIRA 99 - 02
DAEWOO LEGANZA 99 - 02

Wiring Diagrams and Drawings:

2001 Daewoo Nubira- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - PNK
GROUND - CHASSIS
FAST - PPL
SLOW - DK-GRN

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

Some models and years may vary slightly in wire colors.
If possible, confirm wire colors with service guide, and/or with
with a multimeter.

To find CHASSIS ground:
Find a suitable screw or bolt on the metal chassis of the
vehicle for the Rain Tracker ground. Be sure to scrape
away paint as needed for a good connection. If possible,
check the ground connection with a multi-meter. (It should
be at most a couple of ohms.) An alternative source for
ground is the cigarette lighter. (This can also be an alternative
source of +12V power for some applications as well.)

Print this page with your browser's print function.
Vehicle data file name: daewoo_nubira.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800