Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
CHRYSLER PACIFICA 04 - 05
CHRYSLER VOYAGER 01 - 03
CHRYSLER TOWN & COUNTRY 01 - 07
DODGE-TRUCK CARAVAN, GRAND CARAVAN 01 - 07
Wiring Diagrams and Drawings:
Chrysler Vans 01-07 RT-50
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - PNK/WHT
GROUND - PPL/ORN
MUX - BRN/YEL
External Components Required for this installation
RESISTOR - 680 - Color Code: BLU-GRY-BRN
RESISTOR - 330 - Color Code: ORN-ORN-BRN
Special Rain Tracker Installation Notes for this vehicle:
NOTE: GROUND may be PPL/LT-BLU, check with a multi-meter or
the vehicles service manuals to be sure.
Trace the wires from the stalk wiper switch.
+12V wire is available from ignition switch.
Wire in the external resistors as shown on the diagram.
MORE TROUBLESHOOTING NOTES FOR THIS VEHICLE
- For the Rain Tracker to operate correctly, the factory switch needs to be
in the vehicle. It cannot be removed.
- If you have the wrong resistor values, the Rain Tracker will not work.
confirm them with a multi-meter.
Print this page with your browser's print function.
Vehicle data file name: chrysler_vans_01-07.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.