Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
CHRYSLER LHS 94 - 01
CHRYSLER CIRRUS 95 - 00
CHRYSLER 300M 99 - 04
CHRYSLER CONCORDE 93 - 04
CHRYSLER CROSSFIRE 04 - 06
CHRYSLER SEBRING 97 - 05
DODGE INTREPID 93 - 04
DODGE STRATUS SEDAN 95 - 06
EAGLE VISION 93 - 97
PLYMOUTH BREEZE 96 - 00
Wiring Diagrams and Drawings:
Chrysler SWM with RT-50
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - DK-BLU
GROUND - CHASSIS
MODE - DK-GRN/RED
External Components Required for this installation
RESISTOR - 680 - Color Code: BLU-GRY-BRN
RESISTOR - 390 - Color Code: ORN-WHT-BRN
Special Rain Tracker Installation Notes for this vehicle:
NOTE: 04 - 07 Crossfire only - MODE is BLU, +12V is BLK/YEL/DK-GRN
NOTE: On the Plymouth Breeze - MODE - DK-GRN/YEL
Some models and years may vary slightly in wire colors.
If possible, confirm wire colors with service guide, and/or with
with a multimeter.
All wires except ground are available coming from the wiper
switch. They can usually be accessed by removing one or
two access panels (Kick Panels.)
Find a suitable screw or bolt on the metal chassis of the
vehicle for the Rain Tracker ground. Be sure to scrape
away paint as needed for a good connection. If possible,
check the ground connection with a multi-meter. (It should
be at most a couple of ohms.) An alternative source for
ground is the cigarette lighter. (This can also be an alternative
source of +12V power for some applications as well.)
Print this page with your browser's print function.
Vehicle data file name: chrysler_swm.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.