Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

CHEVROLET PRIZM 98 - 02

Wiring Diagrams and Drawings:

2000 Chevrolet Prizm
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - BLU
GROUND - WHT/BLK
FAST - BLU/RED
SLOW - BLU/BLK

Special Rain Tracker Installation Notes for this vehicle:


Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

FROM SWITCH, ACCESS PANELS
All wires are available coming from the wiper
switch. They can usually be accessed by removing one or
two access panels (Kick Panels.)

Some models and years might vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.

Print this page with your browser's print function.
Vehicle data file name: chevrolet_prizm_00.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800