Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions
These instructions apply to these vehicles, which all have similar wiper systems:
CHEVROLET AVEO NOTCHBACK 07
Wiring Diagrams and Drawings:
2007 Chevrolet Aveo Notchback
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.
Wire colors used in this vehicle:
+12V - PNK
GROUND - CHASSIS
FAST - DK-GRN
SLOW - PPL
Special Rain Tracker Installation Notes for this vehicle:
Note: 2007 has 2 different models, the hatchback and notchback. They have
different diagrams, make sure which one you have before installing
Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.
FROM SWITCH, ACCESS PANELS, EXCEPT GROUND
All wires except ground are available coming from the wiper
switch. They can usually be accessed by removing one or
two access panels (Kick Panels.)
FIND CHASSIS GROUND
Find a suitable screw or bolt on the metal chassis of the
vehicle for the Rain Tracker ground. Be sure to scrape
away paint as needed for a good connection. If possible,
check the ground connection with a multi-meter. (It should
be at most a couple of ohms.) An alternative source for
ground is the cigarette lighter. (This can also be an alternative
source of +12V power for some applications as well.)
Some models and years may vary slightly in wire colors. If possible, confirm
wire colors with service guide, and/or with with a multimeter.
Print this page with your browser's print function.
Vehicle data file name: chevrolet_aveo_notchback_07.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks
and vans.