Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

AUDI TT 00 - 06

Wiring Diagrams and Drawings:

2004 Audi TT- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - BLU/RED
GROUND - CHASSIS
FAST - GRN/YEL
SLOW - WHT/GRN

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

Wires are available at the Wiper Switch but colors vary from those at the
Wiper Motor.

Use a multimeter to verify wire functions before making connections
to the Rain Tracker.


Print this page with your browser's print function.
Vehicle data file name: audi_tt_00-06.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800