Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell how to install a Rain Tracker. This page gives special vehicle-specific information.

These instructions apply to these vehicles, which all have similar wiper systems:

AUDI A4 98 - 01
AUDI S4 00 - 01

Wiring Diagrams and Drawings:

2002 Audi A4- also for vehicles with similar wiper systems
RT-50 - HSS (Hot Side Switching)- Included with product
Troubleshooting procedure. Print out if needed.

Wire colors used in this vehicle:

+12V - BLU/RED
GROUND - BRN
FAST - BLK/PPL
SLOW - BLK/GRN

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker. Use the factory drawing as a reference
to help you find the wires.

All wires except ground are available coming from the wiper switch. They
can usually be accessed by removing one or two access panels (Kick Panels.)

Use a multimeter to verify wire functions before making connections
to the Rain Tracker.

Print this page with your browser's print function.
Vehicle data file name: audi_a4_98-01.veh
OEDES makes aftermarket rain sensors and rain sensing automatic wiper control systems for most cars, trucks and vans.

2004 - 2008 Opto-Electronic Design, Inc. All rights reserved. / www.oedes.com / E-mail: info@oedes.com / Phone: (888) 621-5800